2013 Latest Cisco 350-001 Exam Section 2: General Routing Concepts (17 Questions)
QUESTION NO: 1
Under the OSPF process of your router’s configuration, you type in “redistribute igrp 25 metric 35 subnets” in order to redistribute your OSPF and IGRP routing information. What affect did the “subnets” keyword have in your configuration change?
A. It resulted in OSPF recognizing non-classful networks.
B. It had no effect since IGRP will summarize class boundaries by default.
C. It forced IGRP into supporting VLSM information.
D. It caused OSPF to accept networks with non-classful masks.
Whenever there is a major net that is subnetted, you need to use the keyword subnet to redistribute protocols into OSPF. Without this keyword, OSPF only redistributes major network boundaries. It is possible to run more than one OSPF process on the same router, but running more than one process of the same protocol is rarely needed, and it consumes the router’s memory and CPU.
A. OSPF already always recognizes non-classful networks and their VLSM information.
B. Although IGRP does indeed summarize by class boundaries, OSPF does not by default. The “subnets” keyword enables OSPF to use VLSM information from the IGRP routes.
C. IGRP does not support VLSM routing information.
QUESTION NO: 2
Which routing protocols do not need to have their router ID reachable by other routers within any given network in order to maintain proper network connectivity? (Choose all that apply)
F. None of the above
Answer: A, B, C
The router ID of each router does not necessarily need to be reached by other routers in the network for EIGRP and OSPF. BGP uses TCP as the reliable exchange of information between routers, and BGP routers do not need to even be directly connected.
D, E. LDP and TDP are not routing protocols.
QUESTION NO: 3
Which of the following does On Demand Routing use to transport ODR information from router to router?
ODR uses information from the Cisco Discovery Protocol (CDP).
A, B, D, E. ODR has nothing to do with RIP, BGP, UDP, or LSP.
QUESTION NO: 4
A router running multiple protocols learns how to reach a destination through numerous different methods. Which of the following information will the router use first to determine the best way to reach the given destination?
A. The length of the network mask of a route.
B. The administrative distance of a route.
C. The metric of a route.
D. None of the above.
Most specific network match is always used first.
B, C: The administrative distance and metric is consulted only for routes with the same
network mask length.
QUESTION NO: 5
Which of the following routing protocols has a default administrative distance less that the default IS-IS AD?
A. External EIGRP routes
B. iBGP routes
C. Internal EIGRP routes
D. RIP version 1 routes
Answer: C, E
The default IS-IS administrative distance is 115. Internal EIGRP routes are 90, and
external BGP is 20.
A. External EIGRP routes have an AD of 170.
B. Interior BGP routes have an AD of 200.
D. RIP routes have an AD of 120.
QUESTION NO: 6
Which of the following are key differences between RIP version 1 and RIP version 2? (Choose all that apply)
A. RIP version 1 supports authentication while RIP version 2 does not.
B. RIP version 2 uses multicasts while RIP version 1 does not.
C. RIP version 1 uses hop counts as the metric while RIP version 2 uses bandwidth information.
D. RIP version 1 does not support VLSM while RIP version 2 does.
E. RIP version 1 is distance vector while RIP version 2 is not.
Answer: B, D
Both Classless Routing and Multicast updates (184.108.40.206) were impossible with RIP v1 and are available with RIP version 2.
A. RIPv2 supports neighbor authentication. RIPv1 does not support this.
C. Both RIP version use hop counts as the metric.
E. Both RIP versions are distance vector routing protocols.
QUESTION NO: 7
You are deciding which routing protocol to implement on your network. When weighing the different options, which of the following are valid considerations?
A. Distance vector protocols have a finite limit of hop counts whereas link state protocols place no limit on the number of hops.
B. Distance vector protocols converge faster than link state protocols.
C. RIP is a distance vector protocol. RIP v2 and OSPF are link state protocols.
D. Distance vector protocols only send updates to neighboring routers. Link state protocols depend on flooding to update all routers in the within the same routing domain.
Only A is true.
B. Link state protocols have the benefit of better convergence than distance vector protocols.
C. RIPv2 is a distance vector protocol, just like RIP version 1.
D. Link state protocols do not flood updates to every router within the same domain, just within their area.
QUESTION NO: 8
The TestKing network contains two routers named Router TK1 and Router TK2 as shown in the following exhibit: Both Router TK1 and Router TK2 are running RIPv1. Both routers are configured to advertise all of their attached networks via RIP. Which of the networks connected to Router TK2 will be advertised to Router TK1?
A. 10.10.10.0/27 and 220.127.116.11/28
B. 10.0.0.0/8 and 18.104.22.168/24
C. 22.214.171.124/28 and 126.96.36.199/22
D. Only 10.0.0.0/8
E. Only 188.8.131.52/28
F. Only 10.10.10.0/27
G. None of the above
Only one subnet 10.0.0.0/8 will be advertised.
In this scenario we are being tested on the following concepts:
RIP V1 performs auto summarization at network boundaries by default. It treats the
subnets to be advertised differently depending upon several attributes of the respective
Here is the process RIP v1 uses to advertise, assuming that there are no filters (such as
distribute-lists, or route-maps) to block the packet:
Is the route to be advertised part of the major network of the interface?
If it is, then advertise. If it is not, then summarize the network to its classful boundary and send it out.
This is the fate of the 10.10.10.0/27 subnet, which will be summarized as 10.0.0.0/8
and sent out.
A, C, E. If the route is part of the major network, check to see of the subnet mask matches that of the outgoing interface. If the subnet mask does match then advertise the route out the interface. If the subnet mask of the route does not match the interface’s subnet mask, then do not advertise the route out the interface unless the route is a host route (/32). This is the fate of the 184.108.40.206/28 subnet, which will not be sent out (advertised) at all. B, C. Super net advertisement (advertising any network prefix less than its classful major network) is not allowed in RIP route summarization. This is the fate of the 220.127.116.11/22 subnet, which will be not be sent out (advertised) at all.
F. The 10.10.10.0/27 network will be summarized and sent as10.0.0.0/8.
If the route is a host route then advertise it out.
QUESTION NO: 9
You are the network administrator at TestKing. The Routing protocols which run between the different routers in the TestKing network are shown in the following exhibit: On Router TK3 RIPv2 is being redistributed into EIGRP. No other redistribution is done to the network.
With regard to this scenario, who owns the route for subnet 18.104.22.168/24 in the routing table of Router TK1?
A. Nobody, because the route is neither in the routing table of Router TK1, nor EIGRP topology table.
B. External EIGRP.
C. The route is only in the EIGRP topology table only and not in the routing table of Router TK1.
D. Internal EIGRP.
E. The route is only but is in the EIGRP topology table as an active route and not in the routing table of Router TK1.
External EIGRP will own the route, because the route is from outside the AS. Routes that
are redistributed into EIGRP are automatically considered external EIGRP routes.
A. Since RIPv2 allows for VLSM information to be carried in the route, there are no
concerns about the route not being advertised due to summarization. Since RIPv2 is being
redistributed into EIGRP, TK1 will learn about the route via TK2 and TK3.
C, E. This route will be in both the EIGRP table, as well as the IP routing table.
D. Redistributed routes always show up as External routes.
Note: From the perspective of router TK1, all routes are EIGRP learned, since that is the
only protocol running on this router. Although the AD of RIP is lower than external
EIGRP routes, RIP is not being configured on TK1 so it will not learn this route via RIP.
QUESTION NO: 10 The router topology for the multi-protocol TestKing network is shown in the following exhibit: The current configuration for Router TK1, Router TK2, Router TK3, and Router TK4 are as follows:
ip address 22.214.171.124 255.255.255.255
router eigrp 10
ip address 126.96.36.199 255.255.255.255
router eigrp 10
router ospf 10
network 188.8.131.52 0.0.0.255 area 0
network 184.108.40.206 0.0.0.255 area 0
router eigrp 10
redistribute connected metric 1400 230 1 255 1500
router ospf 10
redistribute connected metric 100 subnets
network 220.127.116.11 0.0.0.255 area 0
router bgp 10
network 18.104.22.168 mask 255.255.255.0
neighbor 22.214.171.124 remote-as 10
neighbor update-source loopback
Your newly appointed TestKing trainee wants to know who owns the subnet 126.96.36.199/24 in the routing table of Router TK1.
What would your reply be?
A. Router TK1 does not have this subnet in its routing table.
F. It is there as a static route.
Routers TK1, TK2, and TK4 are all EIGRP neighbors with all relevant subnets advertised, so this route will show up as an EIGRP route.
C, D, E. Router TK1 is only running the EIGRP protocol, so the other routing protocols are completely ruled out.
QUESTION NO: 11 Which of the following are Distance Vector routing protocols? (Choose all that apply)
C. RIP version 1
F. RIP version 2
Answer: C, E, F
Both RIP version 1 and RIP version 2 are distance vector protocols.
EIGRP is an enhanced distance vector protocol, relying on
the Diffused Update Algorithm (DUAL) to calculate the shortest path to a
destination within a network
A, D. OSPF and ISIS are link state routing protocols.
B. BGP is a path vector protocol, which is similar to a distance vector protocol, but with a key difference. A distance vector protocol chooses routes based on hop count, where BGP chooses routes that traverse the least number of Autonomous Systems, among other things.
QUESTION NO: 12
As the administrator of the TestKing network, you are planning to implement a dynamic routing protocol to replace the static routes. When comparing link state and distance vector routing protocols, what set of characteristics best describe Link-State routing protocols?
A. Fast convergence and lower CPU utilization
B. High CPU utilization and prone to routing loops
C. Slower convergence time and average CPU utilization
D. Fast convergence and greater CPU utilization
E. None of the above
Link State protocols, such as IS-IS and OSPF, converge more quickly than their distance vector counterparts, through the use of flooding and triggered updates. In link state protocols, changes are flooded immediately and computed in parallel.
Triggered updates improve convergence time by requiring routers to send an update
message immediately upon learning of a route change. These updates are triggered by
some event, such as a new link becoming available or an existing link failing.
The main drawbacks to Link State protocols are the amount of CPU overhead involved in
calculating route changes and memory resources that are required to store neighbor tables,
route tables, and a complete topology map.
QUESTION NO: 13 A customer has a router with an interface connected to an OSPF network, and an interface connected to an EIGRP network. Both OSPF and EIGRP have been configured on the router. However, routers in the OSPF network do not have route entries in the route table for all of the routers form the EIGRP network. The default-metric under OSPF is currently set to 16. Based on this information, what is the most likely cause of this problem?
A. The ‘subnets’ keyword was not used under the OSPF process when redistributing EIGRP into OSPF.
B. EIGRP is configured as a Stub area, and therefore routes will not be redistributed unless a route-map is used to individually select the routes for redistribution.
C. The ‘subnets’ keyword was not used the EIGRP process when redistributing between OSPF into EIGRP.
D. The default metric for OSPF is set to 16, and therefore all EIGRP routes that are redistributed are assigned this metric, and are automatically considered unreachable by EIGRP.
E. A metric was not assigned as part of the redistribution command for EIGRP routes redistributing into OSPF, and the default behavior is to assign a metric of 255, which is considered unreachable by OSPF.
When routes are redistributed into OSPF, only routes that are not subnetted are redistributed if the subnets keyword is not specified. It is generally a good idea to include the “subnets” keyword at all times when redistributing routes from other protocols into OSPF.
B. There is nothing in this question to lead us to believe that stub networks are being used at all. Even if they were, route maps would not be needed to redistribute the EIGRP and OSPF routes.
C. The “subnets” keyword needs to be placed under the OSPF process, not the EIGRP process.
D. EIGRP routes with a metric of 16 are acceptable, and not considered unreachable. If the routing protocol used was RIP instead of EIGRP then this would be true.
E. When redistributing from one OSPF process to another OSPF process on the same router, the metric will be carried through from one process to the other if no metric value is specified. When redistributing other processes to an OSPF process, the default metric is 20 when no metric value is specified.
QUESTION NO: 14 The TestKing WAN consists of an OSPF network portion and an EIGRP routed portion as shown in the display below: Given the network and OSPF configuration shown in the exhibit, what statement is true regarding traffic flowing from PC-A to PC-B?
A. Traffic will only flow on the shortest, low-speed path, PC-A-H-D-B-A-PC-B.
B. Traffic will flow on both of the high speed paths (PC-A-H-F-C-B-A-PC-B and PC-A-H-G-E-B-A-PC-B) but not the slow-speed path.
C. Traffic will flow on all three of the paths.
D. Traffic will flow uni-directionally on one of the high-speed paths form PC-A to PC-B, and uni-directionally on the other high-speed path from PC-B to PC-A.
E. Traffic will flow bi-directionally on only one of the high-speed paths, and the path selected will be based on the OSPF process IDs.
The default metric for OSPF is 100,000,000 divided by the bandwidth. For each 100 Mbps fast Ethernet link, the OSPF cost will be 1. For the slower, 10 Mbps Ethernet link, the OSPF cost will be 10, so the traffic will be routed around the slower link to the high speed links even though more hops are involved, because each high speed link across the entire OSPF cloud will have a total cost of 3 (1+1+1). This is true even though the redistributed routes are external type-2 routes. By default, OSPF will load balance traffic across up to four equal cost paths. Therefore, choice B is correct in that traffic will utilize both high speed links.
QUESTION NO: 15 The Testking network is redistributing IS-IS and RIP version 2 routes as shown in the diagram below: Routers B and G both advertise RIP learned routes into IS-IS. Network is added to Router A via an Ethernet port and Router B is the First router to learn about this new network. After the network has converged, what path will Router G take to reach network 188.8.131.52?
A. Router G takes the direct path through router A.
B. Router G takes the path through routers, F, E, D, C, B, A.
C. Router G will oscillate between the path through router A and the path through router
Leading the way in IT testing and certification tools, www.testking.com
– 24 –
D. Router G and router B will both think the other router is the best path to network 184.108.40.206, causing a routing loop.
E. The answer can not be determined unless the default-metric used in the redistribution is known.
Explanation: When a router receives identical route and subnet mask information for a given network from two different routing protocols, the route with the lowest administrative distance is chosen. IS-IS has a lower administrative Distance than RIP, so this route is installed in the routing table and used, even though it is obviously not the optimal route in this specific example.
QUESTION NO: 16 The Testking network uses multiple IP routing protocols with redistribution, as shown in the diagram below: Area 51 is configured as a NSSA Totally Stub, using the “area 51 stub no-summary” command. Which routers are in the routing table of Router D?
A. Redistributed EIGRP and RIP routes, one OSPF default route, OSPF inter and intra-area routes
B. Redistributed EIGRP routes and OSPF intra-area routes
C. Redistributed EIGRP routes and OSPF inter and intra-area routes
D. Redistributed EIGRP routes, an OSPF default route and OSPF intra-area routes
E. Redistributed EIGRP and RIP routes and an OSPF default route
In the network diagram above, Area 51 is defined as a totally NSSA stub area. EIGRP routes cannot be propagated into the OSPF domain because redistribution is not allowed in the stub area. However, if we define area 51 as NSSA, we can inject EIGRP routes into the OSPF NSSA domain by creating type 7 LSAs. Redistributed RIP routes will not be allowed in area 51 because NSSA is an extension to the stub area. The stub area characteristics still exist, including no type 5 LSAs allowed. There are two ways to have a default route in an NSSA. When you configure an area as NSSA, by default the NSSA ABR does not generate a default summary route. In the case of a stub area or an NSSA totally stub area, the NSSA ABR does generate a default summary route. In addition, all OSPF intra-area routes are allowed in a totally NSSA area.
A, E. The RIP will become external OSPF routes after the redistribution takes place. Since External OSPF routes from a different area are not injected into NSSA areas, no RIP routes will be seen on router D.
B. By making the not-so-stubby area a totally not-so-stubby area, a default route is injected, so D is the preferred choice over B.
C. Inter-area routes are not seen on routers within a totally NSSA.
QUESTION NO 17:
The TestKing network is displayed below:
Based on the information above, what path would router TestKing8 use to reach a network on router TestKing1? (Assume that mutual route redistribution takes place at all protocol boundaries)
A. Router TestKing8 takes the path through TestKing6.
B. Router TestKing8 takes the path through TestKing4.
C. Router TestKing8 takes the path through TestKing3.
D. Router TestKing8 takes the path through TestKing2.
E. None of the above.
Assuming that redistribution of routes is taking place on all routers, TestKing8 would receive multiple routes to the same network destination. Because of this, TestKing8 would choose to install the route with the lowest Administrative Distance into the routing table. The default AD of the routes shown above is: EIGRP: 90 IGRP: 100 OSPF: 110 RIP: 120 Therefore, router TestKing8 will go through the IGRP route via router TestKing6.
Ensurepass offers Latest 2013 CCIE 350-001 Real Exam Questions , help you to pass exam 100%.