You have a datacenter that contains six servers. Each server has the Hyper-V server role installed and runs
Windows Server 2012.
The servers are configured as shown in the following table.
Host4 and Host5 are part of a cluster named Cluster1. Cluster1 hosts a virtual machine named VM1. You need to move VM1 to another Hyper-V host. The solution must minimize the downtime of VM1. To which server and by which method should you move VM1
A. To Host3 by using a storage migration B. To Host6 by using a storage migration C. To Host2 by using a live migration
D. To Host1 by using a quick migration
Correct Answer: A
Section: Storage & High availability
The processor vendors should be the same so Host2 and Host6 are not possible answers
Local disk cannot be used neither so Host1 is not a possible answer netiehr
For more information about VM storage migration :
Virtual Machine Storage Migration Overview Applies To: Windows Server 2012
In Windows Server 2008 R2, you can move a running instance of a virtual machine using live migration, but
you are not able to move the virtual machines storage while the virtual machine is running.
Hyper-V in Windows Server 2012 introduces support for moving virtual machine storage without downtime by making it possible to move the storage while the virtual machine remains running. You can perform this task by using a new wizard in Hyper-V Manager or by using new Hyper-V cmdlets for Windows PowerShell.
You can add storage to either a stand-alone computer or to a Hyper-V cluster, and then move virtual machines to the new storage while the virtual machines continue to run.
The most common reason for moving a virtual machines storage is to update the physical storage that is available to Hyper-V. You can also move virtual machine storage between physical storage devices, at run time, to respond to reduced performance that results from bottlenecks in the storage throughput.
Key benefits
Hyper-V in Windows Server 2012 makes it possible to move virtual machine storage while a virtual machine is running.
You need the following to use the Hyper-V functionality of moving virtual machine storage: One or more installations of Windows Server 2012 with the Hyper-V role installed.
A server that is capable of running Hyper-V. Specifically, it must have processor support for hardware virtualization.
Virtual machines that are configured to use only virtual hard disks for storage.
NOTE : You cannot move the storage of a virtual machine when any of its storage is directly attached to a physical disk.
Technical overview
This new feature allows you to move the virtual hard disks of a virtual machine while those virtual hard disks remain available for use by the running virtual machine. When you move a running virtual machines virtual hard disks, Hyper-V performs the following steps, as shown in Figure 1:
Throughout most of the move operation, disk reads and writes go to the source virtual hard disk. While reads and writes occur on the source virtual hard disk, the disk contents are copied to the new destination virtual hard disk.
After the initial disk copy is complete, disk writes are mirrored to both the source and destination virtual hard disks while outstanding disk changes are replicated.
After the source and destination virtual hard disks are completely synchronized, the virtual machine switches over to using the destination virtual hard disk.
The source virtual hard disk is deleted.

Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Print and
Document Services server role installed.
You connect a new print device to the network. The marketing department and the sales department will use the print device.
You need to provide users from both departments with the ability to print to the network print device. The solution must ensure that if there are multiple documents queued to print, the documents from the
sales users print before the documents from the marketing users.
What should you do on Server1?
A. Add one printer. Modify the printer priority and the security settings.
B. Add two printers. Modify the priorities of each printer and the security settings of each printer. C. Add two printers and configure printer pooling.
D. Add one printer and configure printer pooling.
Correct Answer: B
Section: File and Print Services
Explanation/Reference: http://wiki.answers.com/Q/How_do_you_set_different_print_priority_for_different_users How do you set different print priority for different users?
To set different print priority to different groups
Open Printers and Faxes.
Right-click the printer you want to set, click Properties, and then click the Advanced tab.
In Priority, click the up or down arrows, and then click OK. Or, type a priority level, where 1 is the lowest level and 99 is the highest, and then click OK. Click Add Printer to add a second logical printer for the same physical printer. For instructions.
Click the Advanced tab.
In Priority, set a priority higher than that of the first logical printer.
Instruct the regular group of users to use the first logical printer name and the group with higher priority to
use the second logical printer name. Set the appropriate permissions for the different groups.
=============== NB :
Creating a printing pool
You can create a printing pool to automatically distribute print jobs to the next available printer.
A printing pool is one logical printer connected to multiple printers through multiple ports of the print server. The printer that is idle receives the next document sent to the logical printer. This is useful in a network with a high volume of printing because it decreases the time users wait for their documents. A printing pool also simplifies administration because multiple printers can be managed from the same logical printer on a server.
With a printing pool created, the user prints a document without having to find out which printer is available. The logical printer checks for an available port and sends documents to ports in the order that they are added. Adding the port connected to the fastest printer first ensures that documents are sent to the printer that can print the fastest before they are routed to slower printers in the printing pool.
Before setting a printing pool, consider the following: All printers in a pool must use the same driver.
Because users will not know which printer in the pool prints a given document, make sure all printers in the pool are located in the same place.

Your network contains an Active Directory domain named adatum.com. The domain contains several thousand member servers that run Windows Server 2012.
All of the computer accounts for the member servers are in an organizational unit (OU) named
Servers are restarted only occasionally. You need to identify which servers were restarted during the last two days.
What should you do?
A. Run dsquery computer and specify the -sra /epwc parameter.
B. Run Get-ADComputer and specify the SearchScope parameter. C. Run dsquery server and specify the -o parameter.
D. Run Get-ADComputer and specify the lastLogon property
Correct Answer: D
Section: Monitoring & Maintaing (Backup, Restore, Updates, Business Continuity, Disaster
Recovery…) Explanation
Specifies the scope of an Active Directory search. Possible values for this parameter are: Base or 0
OneLevel or 1
Subtree or 2
A Base query searches only the current path or object.
A OneLevel query searches the immediate children of that path or object.
A Subtree query searches the current path or object and all children of that path or object.
Dsquery server
-o {dn rdn}
Spcifie le format que dsquery utilise pour afficher les rsultats de recherche. Une valeur dn affiche le nom unique de chaque entre. Une valeur de rdn affiche le nom unique relatif de chaque entre. La valeur par dfaut est le nom de domaine.
NB : epwc doesn’t exist for Dsquery computer
so even if i’m not sure it’s the best way, the only possible answer is using “Get-ADComputer and specify the lastLogon property”

Your network contains an Active Directory domain named adatum.com. The domain contains three domain controllers.
The domain controllers are configured as shown in the following table.
DC3 loses network connectivity due to a hardware failure. You plan to remove DC3 from the domain. You log on to DC3. You need to identify which service location (SRV) records are registered by DC3. What should you do?
A. Open the %windir%system32dnsbackupadatum.com.dns file. B. Run ipconfig /displaydn*.
C. Run dcdiag /test:dns,
D. Open the %windir%system32confignetlogon.dns file.
Correct Answer: D
Section: Network (DNS, DHCP, NIC teaming, IPAM, VPN, NAP, DirectAccess…) Explanation
The netlogon.dns file contains all registrations. it’s not the best way but it’s a possible way.
How to verify that SRV DNS records have been created for a domain controller
The SRV record is a Domain Name System (DNS) resource record that is used to identify computers that host specific services. SRV resource records are used to locate domain controllers for Active Directory. To verify SRV locator resource records for a domain controller, use one of the following methods .
DNS Manager
After you install Active Directory on a server running the Microsoft DNS service, you can use the DNS Management Console to verify that the appropriate zones and resource records are created for each DNS zone.
Active Directory creates its SRV records in the following folders, where Domain_Name is the name of your domain:
Forward Lookup Zones/Domain_Name/_msdcs/dc/_sites/Default-First-Site-Name/_tcp Forward Lookup
In these locations, an SRV record should appear for the following services:
If you are using non-Microsoft DNS servers to support Active Directory, you can verify SRV locator resource records by viewing Netlogon.dns. Netlogon.dns is located in the %systemroot%System32
Config folder. You can use a text editor, such as Microsoft Notepad, to view this file.
The first record in the file is the domain controller’s Lightweight Directory Access Protocol (LDAP) SRV
record. This record should appear similar to the following:
Nslookup is a command-line tool that displays information you can use to diagnose Domain Name System
(DNS) infrastructure.
To use Nslookup to verify the SRV records, follow these steps:
On your DNS, click Start, and then click Run. In the Open box, type cmd.
Type nslookup, and then press ENTER. Type set type=all, and then press ENTER.
Type _ldap._tcp.dc._msdcs.Domain_Name, where Domain_Name is the name of your domain, and then press ENTER.
Nslookup returns one or more SRV service location records

You have a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.
On Server1, you create a virtual machine named VM1. VM1 has a legacy network adapter. You need to assign a specific amount of available network bandwidth to VM1.
What should you do first?
A. Add a second legacy network adapter, and then configure network adapter teaming.
B. Remove the legacy network adapter, and then run the Set-VMNetworkAdapter cmdlet. C. Remove the legacy network adapter, and then add a network adapter.
D. Add a second legacy network adapter, and then run the Set-VMNetworkAdapter cmdlet.
Correct Answer: C Section: Hyper-V Explanation
The legacy adapter doesn’t support bandwidth management (check screenshots below).
and if we remove the legacy network adapter without adding a new one, what would we set with Set- VMNetworkAdapter ?
so the complete answer should be “Remove the legacy network adapter, then add a network adapter, and then run the Set-VMNetworkAdapter cmdlet”
but we’re asked for what we should do FIRST…
Settings for 2012GUI2 on Z02012
Add Hardware
B tfrom CD
2048 MB
4 Viual pro?ssors
il IDE Controller 0
cil Hard Drive
2012GUI2 EBB119D2-36…
il IDE Controller 1
DVD Drive
SRV 2012 – 9200.16384….
!w Lacy Network Adapter
Spedfy the nfiguration of the network adapter or remove the r adapter.
Virtual switd1
Enable virtual LANntificatio
The VLAN identifier spedfies the virtual LAN that this Vlrtual m use for all network mmunications through this network ada
To remove the network adapter from th virtual mad1inedid< R Network Adapter Privl Network Adapter Intel(R) Centrino( reless-... COM 1 None CO 12 None skette Drive None Were mmend that yuu use a legacy network adapter onl perm a network-ba d installation of the gu toperating integration servi?s are not installin the gutoperatng Communications through a legacy network adapter are slov through a network adapter. Name 2012GUI2 Intration Servi?s AII servi S offer Snapshot File Location F:V12012 2012GUI22012G SmartpagFile Location Ican?l (you'lI see in the next screenshotthatfor a "Network adapterbandwidth is managed here) http://te chnet.micro soco m/en-usAibrary/hh848457.aspx Se!IMNetw kAdap!er Configures features of the virtual network adapter in a virtual machine or the management operating system. [...] -MaximumBandwidth Specifies the maximum bandwidth, in bits per second, for the virtual network adapter. The specified value is rounded to the nearest multiple of eight. Specify zero to disable the feature.
from Microsoft.Press.Exam.Ref.70-417.Oct.2012
Bandwidth management
Bandwidth management is a new feature in Windows Server 2012 Hyper-V that enables you to set both a minimum and maximum Mbps of throughput for any virtual network adapter. In Windows Server 2008 R2, you could configure a maximum bandwidth but not a minimum. Now you can configure both a minimum and a maximum for each virtual network adapter.
You enable and configure bandwidth management on a virtual network adapter in the settings of a VM, as shown in Figure 3-12. For either the Minimum Bandwidth or Maximum Bandwidth setting, configuring a value of 0 leaves that setting unrestricted.
You can also use the Set-VMNetworkAdapter to configure minimum and maximum bandwidth on a virtual network adapter. As an alternative to specifying a value for Mbps, you can use this cmdlet to specify a relative bandwidth weight between 0 and 100 relative to other virtual network adapters. To ensure that all virtual network adapters are given an equal minimum or maximum bandwidth, you can assign the same bandwidth weight to all adapters.

Download Ensurepass Latest 2013 MCSA 70-417 Real Exam Questions , help you to pass exam 100%.

Comments are closed.