Ensurepass

 

QUESTION 161

Which two options are functions of Cisco Unified CallManager RTMT? (Choose two.)

 

A.

records device-level and port-level information in the gatekeeper table, based on Cisco Unified CallManager alarms

B.

monitors a preconfigured set of management objects

C.

generates daily reports on system resources

D.

stores each H.323 gateway as a device in an H.323 table

 

Correct Answer: BC

 

 

QUESTION 162

What happens by default if the Log Partition Monitor’s high-water mark is exceeded?

 

A.

An alert is sent to RTMT Alert Central and log files are purged until the low-water mark is reached.

B.

An e-mail alert is sent to the administrator and logs are purged, starting with those in the inactive partition and followed by the oldest files in the active partition, until the low-water mark is reached.

C.

An alarm message is sent to the syslog, an alert is generated in RTMT Alert Central, and log files are purged until the low-water mark is reached.

D.

An e-mail alert is sent to alert the administrator and the system starts to purge log files starting with the oldest first.

 

Correct Answer: C

Explanation:

Cisco Unified Communications Manager Real-Time Monitoring Tool Administration Guide LogPartitionHighWaterMarkExceeded (% disk space)

If the percentage of disk usage is above the high water mark that you configured, the system sends an alarm mess
age to syslog, generates a corresponding alert in RTMT Alert Central, and automatically purges log files until the value reaches the low water mark.

 

 

QUESTION 163

Which of these is the best practice to employ when using certificates between a browser and the Cisco Unified CallManager 5.0 server?

 

A.

Use either SSH or CLI to view the thumbprint of the certificate and then communicate the information to all web browser users so they already have it available when they receive the security alert.

B.

Install thumbprint readers on the devices that need to connect to the Cisco Unified CallManager servers via HTTPS.

C.

Use SSH exclusively to verify the thumbprint of the certificate and then send the certificate to all web browser users that require access to the server.

D.

Note the thumbprint of the Cisco Unified CallManager certificates after installation and then communicate the information to all web browser users so they have it available when they receive the security alert.

 

Correct Answer: D

 

 

QUESTION 164

What process does the Log Partition Monitor use to delete logs in excess of the high-water mark?

 

A.

If any log files exist in the inactive partition, those files are deleted first, then the oldest files in the active partition are deleted until the low-water mark is reached.

B.

The oldest files in the active partition are deleted until the low-water mark is reached.

C.

If any log files exist in the inactive partition, those files are moved off to an SFTP server and then the oldest files in the active partition are moved off to an SFTP server until the low-water mark is reached.

D.

The log files in the inactive partition are deleted first and then the oldest files in the active partition are moved off to an SFTP server until the low-water mark is reached.

 

Correct Answer: A

 

 

QUESTION 165

For phone hardening tasks, which two statements are accurate? (Choose two.)

 

A.

By default, Cisco Unified CallManager disables the PC port on all Cisco IP phones that have a PC port. It is possible to enable the PC Port setting in the Phone Configuration window of Cisco Unified CallManager Administration.

B.

Disabling PC voice VLAN access will cause packets received from the PC port that uses the voice VLAN tag to drop.

C.

Disabling settings access prohibits access to all the options that are normally displayed when the Settings button on the phone is pressed.

D.

Disabling settings access automatically sets the current Contrast, Ring Type, Network Configuration, Model Information, Status, and Volume settings to the default for that phone.

 

Correct Answer: BC

 

 

QUESTION 166

Which Cisco Unified CallManager RTMT component retrieves real-time information that exists on nodes in the cluster?

 

A.

Log Partition Monitor

B.

RTMT Java client

C.

Serviceability Reporter

D.

Alert Manager and Collector

 

Correct Answer: D

Explanation:

CUCM RTMT Administration Guide

Cisco AMC (Alert Manager and Collector) service–This service starts up automatically after the installation and allows RTMT to retrieve r
eal-time information that exists on nodes in the cluster. Cisco Unified Communications Manager automatically assigns the first node as the Primary Collector.

QUESTION 167

Which two methods can be used to build a SIP trunk from the Cisco Unified CallManager to a SIP Registrar server and a backup Registrar server? (Choose two.)

 

A.

Configure one SIP trunk to point to the SIP Registrar server and a second SIP trunk to point to the backup Registrar server. Use route groups and a route list to allow calls to be routed to the backup Registrar if the primary does not respond.

B.

Add the SIP Registrar server and the backup Registrar server to the Device Pool assigned to the SIP trunk.

C.

Configure a DNS SRV record name as the destination address of the SIP trunk.

D.

Configure only the SIP Registrar Server in the SIP trunk; The UA message will include the IP address of the backup SIP trunk if the call cannot be set up by the SIP Registrar server.

E.

Configure the IP address of the SIP Registrar server as the first destination address of the trunk and the IP address of the backup Registrar server as the second destination address.

 

Correct Answer: AC

 

 

QUESTION 168

What are three goals of subscriber?

 

A.

Writebale databse

B.

Place the data to COR

C.

Provides call forwarding

D.

Place the data to CDR

E.

Provides call processing

F.

Provides Admin Rights

G.

Read only database

 

Correct Answer: DEG

 

 

QUESTION 169

How can the activation status of DNS services be changed?

 

A.

DNS activation can only be changed by reinstalling Cisco Unified CallManager.

B.

DNS activation can be changed at any time.

C.

DNS activation is on by default and can only be turned off at installation; once DNS activation has been turned off, the system must be reinstalled to turn it back on.

D.

DNS activation is on by default and cannot be changed, but leaving the DNS server addresses and domain name blank disables the service.

 

Correct Answer: A

Explanation:

https://learningnetwork.cisco.com/message/139347#139347

 

 

QUESTION 170

How does the Cisco Unified CallManager use RSVP?

 

A.

it uses RSVP reservations to request double the bandwidth so calls can flow in both directions

B.

it uses the RSVP-configured bandwidth between sites as a method of determining if there is sufficient bandwidth for a call

C.

it uses an RSVP-enabled infrastructure and an RSVP agent controlled by Cisco Unified CallManager to request a bandwidth reservation from the network in order to place a call

D.

it initiates RSVP reservations from the Cisco Unified CallManager server, which is an active participant in the reservation process

 

Correct Answer: C

Free VCE & PDF File for Cisco 642-447 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …

Comments are closed.