Ensurepass

 

QUESTION 521

Which of the following utilities will display a listing of active IP ports on the computer being tested?

 

A.

NETSTAT

B.

PING

C.

IPCONFIG

D.

TRACERT

 

Correct Answer: A

Explanation:

Reference: http://pcsupport.about.com/od/commandlinereference/p/netstat-command.htm

 

 

QUESTION 522

A customer is concerned about a computer that repeatedly beeps when attempting to power on. Which of the following is MOST likely the cause?

 

A.

Network cable is unplugged

B.

USB 2.0 is plugged into USB 1.1 port

C.

RAM not seated properly

D.

Optical media was left in the drive

 

Correct Answer: C

Explanation:

Reference: http://antony492.com/unseated-ram/

 

 

QUESTION 523

Which of the following allows a user to pinch zoom on an Android device?

 

A.

Accelerometer

B.

Micro USB port

C.

Multi-touch

D.

A trackball

 

Correct Answer: C

Explanation:

Reference: http://en.wikipedia.org/wiki/Multi-touch

 

 

QUESTION 524

A network consultant needs to redo a CAT5e wall jack that has become unusable due to recent physical damage. In order to install the replacement jack, which of the following tools would need to be used to both install and validate the hardware? (Select TWO).

 

A.

Cable crimper

B.

Loopback plug

C.

Voltage meter

D.

Cable tester

E.

Punch down tool

 

Correct Answer: DE

 

 

QUESTION 525

After installing a new multifunctional printer, an administrator realizes the flatbed scanner does not scan any documents. Which of the following is the MOST likely reason of the issue?

 

A.

The scanner lock switch on the device is locked.

B.

The printer driver was installed incorrectly.

C.

The multifunction printer’s USB cable was plugged into the incorrect port.

D.

The scanner’s alignment and calibration was not performed.

 

Correct Answer: A

Explanation:

Reference: http://www.justanswer.com/printers/6cceg-scanner-lock-switch-error-message.html

 

 

QUESTION 526

Joe, a technician, recently built a new gaming PC for Ann, a customer, with two hard drives configured in RAID 0. Ann calls and states she was playing a game online and the computer shut off. Now the computer will not boot. Which of the following is a cost effective way to correct the issue?

 

A.

Remove both drives from the RAID array

B.

Reformat both drives and reload windows

C.

Replace both of the drives and load windows

D.

Replace one of the drives and rebuild the array

 

Correct Answer: B

QUESTION 527

A customer calls and states that on two corners of their screen all the colors are distorted, but if they move the monitor forward or backwards the image is fine. Which of the following is the MOST likely cause of this issue?

 

A.

Video cable is going bad

B.

The HDMI cable is coming loose

C.

The display needs to have the geometry adjusted

D.

Speakers were placed too close to the display

 

Correct Answer: D

 

 

QUESTION 528

Which of the following is the difference between a quick and a full format?

 

A.

Quick format does not check for bad sectors while full format does.

B.

Full format prompts for confirmation while quick format does not.

C.

Full format erases all partitions on the disk at once while quick format only erases one partition at a time.

D.

Quick format only erases the system partition and not the data partition.

 

Correct Answer: A

 

 

QUESTION 529

A technician is reconfiguring an email account for off-line mode. Which of the following will describe the expected time of account synchronization with the email server?

 

A.

It will depend on the SMTP settings of the email server.

B.

It will depend on the time when the account was last synchronized.

C.

It will depend on the POP settings of the email server.

D.

There is no off-line mode for email.

 

Correct Answer: B

Explanation:

When you configure email account for offline mode, the software uses synchronization at a point in time to download all email messages to the computer. There is time between synchronizations and it depends on the time of the last synchronization.

 

 

QUESTION 530

Which of the following is the BEST tool to verify the cable is plugged into the correct port on the patch panel?

 

A.

Cable certifier

B.

Punch down

C.

Toner probe

D.

Cable tester

 

Correct Answer: C

Explanation:

Reference: http://en.wikipedia.org/wiki/Logic_probe

Free VCE & PDF File for CompTIA 220-802 Real Exam

Instant Access to Free VCE Files: CompTIA | VMware | SAP …
Instant Access to Free PDF Files: CompTIA | VMware | SAP …

Comments are closed.