QUESTION 101
Refer to the exhibit. When designing an MPLS-based LAN extension between DC-1 and DC-2, what are three advantages of deploying VSS? (Choose three.)
A. |
Layers 2, 3, and 4 flow-based load balancing |
B. |
native VSS and MEC failover without using scripts |
C. |
sub-second failover |
D. |
required to configure VPLS |
E. |
failover time depends on Cisco IOS EEM and STP convergence |
F. |
limited VLAN-based VPLS traffic hashing |
Correct Answer: ABC
QUESTION 102
Refer to the exhibit. Which two options are two characteristics of the single-tier headend architecture for DMVPN designs? (Choose two.)
A. |
The mGRE and crypto functions are on the same router. |
B. |
Each DMVPN cloud has two different headend routers for high availability purposes. |
C. |
It is used in dual-cloud topologies for spoke-to-spoke connectivity. |
D. |
It only supports hub-and-spoke connectivity. |
E. |
Spokes cannot be used as RP in multicast deployments. |
&nbs
p;
Correct Answer: AC
QUESTION 103
A company wants to use an external appliance between its data center and WAN to optimize email and HTTP communications. The traffic flow must pass this appliance in both directions. The appliance is connected with only one interface to a Cisco IOS router and has a single IP address. Which two adjustments can you make to the network design so that the appliance is added into the traffic path? (Choose two.)
A. |
Configure static routes to route the traffic to the appliance. |
B. |
Adjust the dynamic routing to route the traffic to the appliance. |
C. |
Configure NAT to force the traffic to the appliance. |
D. |
Configure a route map at the data center-side interface to forward the traffic to the appliance IP address. |
E. |
Configure a route map at the appliance-facing interface to forward the traffic to the appliance IP address. |
F. |
Configure a route map at the WAN-side interface to forward the traffic to the appliance IP address. |
Correct Answer: DF
QUESTION 104
Refer to the exhibit. Four customer sites are connected through an EoMPLS-based VPLS over an MPLS provider. You are migrating from OSPF to multi-level IS-IS as the routing protocol to run on the four CE routers, and connectivity between all four sites is required. You want to control which CE or CEs will be elected as the Designated Intermediate System. Which two key aspects should be taken into account? (Choose two.)
A. |
The DIS role for Level1 and Level2 can be performed by different routers. |
B. |
The CE with the second highest priority will be elected as the backup DIS on the LAN segment. |
C. |
One of the CE routers will be elected as the DIS based on interface priority then highest MAC address. |
D. |
It is recommended to use point-to-point link type on the CEs. |
E. |
If a new CE router is added to the VPLS cloud with a lower interface priority it will become the DIS. |
Correct Answer: AC
QUESTION 105
For a storage area network design, which technology allows a switch to support multiple Fibre Channel IDs per fabric port?
A. |
N-Port Identifier Virtualization |
B. |
Inter-Virtual Storage Area Network Routing |
C. |
Zoning |
D. |
Fabric Port Trunking |
E. |
Node Port Virtualization |
F. |
Expansion Port Trunking |
Correct Answer: A
QUESTION 106
Refer to the exhibit. On this MPLS-based network ring, links have failed between router A and router E. These failures formed microloops while the network converged, when A forwarded traffic to B but B forwards it back to A. Which technology is the simplest solution to avoid microloops without enabling a new protocol in the network?
A. |
TE Fast ReRoute |
B. |
IP Fast ReRoute |
C. |
Loop-Free Alternate |
D. |
Correct Answer: D
QUESTION 107
Which two options are two advantages of summarizing networks at the aggregation layer rather than at the core? (Choose two.)
A. |
It prevents the core from having unnecessary routes. |
B. |
It no longer needs a core layer. |
C. |
It prevents black hole routing. |
D. |
It avoids network-wide impact upon VLAN changes local to the aggregation devices. |
Correct Answer: AD
QUESTION 108
As part of the network design, ACME Corporation requires the ability to export IPv6 information to better manage its network. Which version of NetFlow records is required to export this information?
A. |
5 |
B. |
6 |
C. |
7 |
D. |
8 |
E. |
9 |
Correct Answer: E
QUESTION 109
DRAG DROP
Correct Answer:
QUESTION 110
Which multicast technology provides a large, many-to-many connectivity for a new application while minimizing load on the existing network infrastructure?
A. |
Bidirectional PIM |
B. |
PIM Sparse Mode |
C. |
Any-source Multicast |
D. |
Source Specific Multicast |
Correct Answer: A
Free VCE & PDF File for Cisco 352-001 Real Exam
Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …
100-105 Dumps VCE PDF
200-105 Dumps VCE PDF
300-101 Dumps VCE PDF
300-115 Dumps VCE PDF
300-135 Dumps VCE PDF
300-320 Dumps VCE PDF
400-101 Dumps VCE PDF
640-911 Dumps VCE PDF
640-916 Dumps VCE PDF
70-410 Dumps VCE PDF
70-411 Dumps VCE PDF
70-412 Dumps VCE PDF
70-413 Dumps VCE PDF
70-414 Dumps VCE PDF
70-417 Dumps VCE PDF
70-461 Dumps VCE PDF
70-462 Dumps VCE PDF
70-463 Dumps VCE PDF
70-464 Dumps VCE PDF
70-465 Dumps VCE PDF
70-480 Dumps VCE PDF
70-483 Dumps VCE PDF
70-486 Dumps VCE PDF
70-487 Dumps VCE PDF
220-901 Dumps VCE PDF
220-902 Dumps VCE PDF
N10-006 Dumps VCE PDF
SY0-401 Dumps VCE PDF