Ensurepass

Deploying Cisco Wireless Enterprise Networks (WIDEPLOY)

 

QUESTION 21

An engineer used an interface group under the SSID configuration, but noticed that a test client is getting an IP assigned in a different VLAN from the DHCP server. Which two options override the interface group configuration on the SSID? (Choose two.)

 

A.

static VLAN on client

B.

ACL

C.

AP group

D.

static IP on client

E.

MAC filtering

F.

RF group

G.

AAA override

 

Correct Answer: CG

 

 

QUESTION 22

A customer requires that the remote site be able to utilize local servers when the AP is in WAN-down (standalone mode). Which AP mode must be configured on the wireless controller?

 

< /tr>

A.

SE-Connect

B.

Monitor

C.

Local

D.

FlexConnect

E.

Sniffer

F.

Rogue Detector

 

Correct Answer: D

 

 

QUESTION 23

A customer has implemented several WLANs in an auditorium utilizing a newly dedicated WLC and is experiencing excessive channel utilization regardless of occupancy. Which action reduces channel utilization without removing SSIDs?

 

A.

Disable MCS data rates 0 through 11.

B.

Disable MCS data rates used by 40 MHz channels.

C.

Disable data rates that use CCK.

D.

Disable VHT data rates.

 

Correct Answer: C

 

 

QUESTION 24

CMX Facebook WiFi can allow access to the network before authentication. Which two of the following options are available? (Choose two)

 

A.

Allow all the traffic before authentication and intercept HTTPs only.

B.

Allow HTTP traffic only before authentication and block all the traffic.

C.

Allow SNMP traffic only before authentication and block all the traffic.

D.

Allow all the traffic before authentication and intercept HTTP only.

E.

Allow HTTPs traffic only before authentication and block all other traffic.

Correct Answer: BD

 

 

QUESTION 25

DRAG DROP

Drag the QoS values from the left and drop them in the correct descending order of priority on the right.

 

clip_image002

 

Correct Answer:

clip_image004

 

QUESTION 26

You have set up FlexConnect APs. For which scenario is Fast Roaming supported, providing the WLAN is mapped to the same VLAN and the client is roaming to an AP on the same Cisco WLC?

 

A.

central switching with PMK (OKC) between different FlexConnect groups

B.

local switching with Cisco Centralized Key Management within the same FlexConnect group

C.

central switching with Cisco Centralized Key Management between different FlexConnect groups

D.

local switching with PMKID within the same FlexConnect group

 

Correct Answer: B

 

 

QUESTION 27

What address do PIM routers listen to in order to automatically discover the best RP for each multicast group?

 

A.

224.0.0.13

B.

224.0.1.39

C.

224.0.0.14

D.

224.0.140

 

Correct Answer: D

 

 

QUESTION 28

An engineer must deploy FlexConnect APs to a site that typically has 300 ms latency to the WLC. Which typical operating mode must the engineer plan on for normal operations?

 

A.

local authentication, local switching

B.

central authentication, central switching

C.

central authentication, local switching

D.

connected mode

 

Correct Answer: A

 

 

QUESTION 29

A network engineer is experiencing issues enabling LAG on the WLC. Which four characteristics should be validated to ensure LAG configuration? (Choose four.)

 

< td style="border-top-style: none; border-left-style: none; background: white; border-bottom-style: none; padding-bottom: 0cm; padding-top: 0cm; border-right-style: none; padding-left: 0cm; padding-right: 0cm" valign="top" width="26">

A.

All ports participate in the LAG by default when LAG is enabled on the controller, y

B.

Dynamic interfaces and management are moved to port 1

C.

Primary and secondary ports are needed for each interface.

D.

Multiple untagged interfaces to the same port are not allowed.

E.

EtherChannel must be configured for mode “on” on the switch.

F.

Only one functional physical port is needed to continue to pass traffic.

G.

Multiple LAGs are permitted on the controller.

H.

The WLC does not need to be rebooted to enable the LAG configuration.

 

Correct Answer: ADEF

 

 

 

QUESTION 30

By default, how long does a Mobility Services Engine wait for an echo response from a Wireless LAN Controller before declaring the neighbor dead?

 

A.

10 Seconds

B.

60 Seconds

C.

15 Seconds

D.

30 Seconds

 

Correct Answer: D

 

Free VCE & PDF File for Cisco 300-365 Actual Tests

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …

Comments are closed.