Latesttests
2018 Jan Oracle Official New Released 1z0-489
100% Free Download! 100% Pass Guaranteed!
http://www.Latesttests.com/1z0-489.html

SPARC M6-32 and SPARC M5-32 Servers Installation Essentials

Question No: 11

You have performed the initial installation of Solaris 11 on your SPARC M5-32 system. You notice thatsome packages, like SunVTS, are not currently installed. What is the reason?

  1. There was an error in the Oracle Solaris 11 installation process. You must re-install.

  2. SunVTS needs to be downloaded separately from http://downloads.oracle.com.

  3. After the system has been installed and rebooted, SunVTS and other packages can be added as described in the Solaris 11 EIS checklist.

  4. SunVTS is no longer supported on Oracle Solaris 11.

Answer: B

Reference: http://docs.oracle.com/cd/E24355_01/html/E41214/z40001331392991.html

Question No: 12

Which statement is correct?

  1. The SPARC M5-32 processor has 16 cores, 48MB L3$; T5 processor ha 16 cores, 8MB L3$

  2. The SPARC M5-32 processor has 6 cores, 48MB L3$; T5 processor ha 16 cores, 8MB L3$

  3. The SPARC M5-32 processor has 16 cores, 24MB L3$; T5 processor ha 16 cores, 8MB L3$

  4. The SPARC M5-32 processor has 6 cores, 24MB L3$; T5 processor ha 16 cores, 48MB L3$

Answer: B

Reference:

http://docs.oracle.com/cd/E24355_01/html/E41214/z40001331392991.html

Question No: 13

In order for ASR to work on the system, what must the customer have configured?

  1. ASR Host

  2. ASR Client system

  3. ASR Manager system

  4. NTP

Answer: C

Reference: https://docs.oracle.com/cd/E37710_01/install.41/e18475/ch1_asr_overview.htm

Question No: 14

Your customer says that they have some specific requirements they would like to address in the boot disk layout for their system. In which Enterprise Installation Standars (EIS) document would you note this?

  1. Site Audit Report

  2. Installation Configuration Plan

  3. Test Procedures Plan

  4. Project Schedule

  5. Operational Handover Document

Answer: B

Question No: 15

Which three options are architectural features that you find in the SPARC M5-32 processor?

  1. 16x S3 cores of 3.6 Ghz

  2. Shared 48 MB L3$

  3. 2x memory controllers

  4. 2x PCI-e Gen3 root complex

  5. 16-way 256 KB L2$

Answer: A,B,D

Question No: 16

Which three statements are true about the newest clock board redesign/ operation in a SPARC M5-32/M6-32 server?

  1. There are two clock boards in a redundant configuration, so the failure of the primary clock board does not cause a reboot of the server.

  2. There are two clock boards. Each has two clock sources, so if a clock source fails, the alternate clock source on the same board takes over.

  3. While the system is running on an active clock board, a faulty clock board can be replaceddynamically.

  4. There are two clock boards in a redundant configuration, and there is a dynamic failover of theprimary clock board to the standby clock board.

Answer: A,B,D

Question No: 17

If you have a PDomain with expandable= false, which components will not be tested when the PDom goes through POST?

  1. CMIs

  2. IOUs

  3. SSBs

  4. DIMMs

Answer: C

Reference: https://docs.oracle.com/cd/E24355_01/html/E41214/bbgebhfe.html

Question No: 18

You enter the following command from the service processor; start /HOSTO/console.What does this accomplish?

  1. Log in to the domain as user root via the console.

  2. Log In to the host as user root from another system.

  3. Confirm that the boot disk configuration is as expected.

  4. Connect to the console from the ACTIVE SP.

Answer: D

Reference:

https://docs.oracle.com/cd/E19720-01/820-1188-12/core_ilom_appa.html

Question No: 19

Which two statements are true according to Enterprise Installation Stan (EIS) regarding boot disk layout?

  1. For ZFS-based root file systems, EIS recommends you do not use H/W RAID 1 unless sufficient disks are available for ZFS to mirror itself.

  2. For ZFS-based root file systems, EIS recommends you do not use H/W RAID 0 unless sufficientdisks are available for ZFS to mirror itself.

  3. Under ZFS, the boot devices/disks are placed in a ZFS poof (called rpool by default), and all datasets (consisting of file systems and volumes) are allocated flexibly from that pool.

  4. For UFS-based root file systems, EIS recommends that H/W RAID 0 be used to mirror the bootdisk wherever it is available.

Answer: A,C

Question No: 20

Which three statements are true about the SPARC M5-32 server power grid connection?

  1. The server is designed to be powered by two utility power grids.

  2. You must connect three power cords (ACO, AC1, and AC2) to one power grid, and connect the remaining three power cords to a second power grid (AC3, AC4, and AC5).

  3. Only 3x power cords need to be connected when operating the server at half load.

  4. All six power cords must be connected, even if you are using only a single power grid.

  5. With dual-power feed set up, the first set of three power cords connected to the server are usedto supply power, and the second set of three power cords are in standby mode.

Answer: A,B,E

Reference:

https://docs.oracle.com/cd/E19658-01/820-6175-12/install_pwr_on.html

100% Free Download!
Download Free Demo:1z0-489 Demo PDF
100% Pass Guaranteed!
Download 2018 Latesttests 1z0-489 Full Exam PDF and VCE

Latesttests ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 Latesttests IT Certification PDF and VCE

Comments are closed.