Ensurepass.com : Ensure you pass the IT Exams
2018 May Microsoft Official New Released 70-412
100% Free Download! 100% Pass Guaranteed!

Configuring Advanced Windows Server 2012 R2 Services

Question No: 231 – (Topic 3)

Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1 that runs Windows Server 2012 R2.

You create a user account named User1 in the domain.

You need to ensure that User1 can use Windows Server Backup to back up Server1. The solution must minimize the number of administrative rights assigned to User1.

What should you do?

  1. Add User1 to the Backup Operators group.

  2. Add User1 to the Power Users group.

  3. Assign User1 the Backup files and directories user right and the Restore files and directories user right.

  4. Assign User1 the Backup files and directories user right.

Answer: D Explanation:

Backup Operators have these permissions by default:

Ensurepass 2018 PDF and VCE

However the question explicitly says we need to minimize administrative rights. Since the requirement is for backing up the data only-no requirement to restore or shutdown-then assigning the quot;Back up files and directories user rightquot; would be the correct answer.

Ensurepass 2018 PDF and VCE

Reference: Default local groups

http://technet.microsoft.com/en-us/library/cc787956(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc756898(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc771990.aspx

Question No: 232 – (Topic 3)

You have a server named Server1 that runs Windows Server 2012 R2. Each day, Server1 is backed up fully to an external disk.

On Server1, the disk that contains the operating system fails. You replace the failed disk.

You need to perform a bare-metal recovery of Server1 by using the Windows Recovery Environment (Windows RE).

What should you use?

  1. The Wbadmin.exe command

  2. The Repair-bde.exe command

  3. The Get-WBBareMetalRecovery cmdlet

  4. The Start-WBVolumeRecovery cmdlet

Answer: A Explanation:

Wbadmin enables you to back up and restore your operating system, volumes, files, folders, and applications from a command prompt.

Wbadmin start sysrecovery

runs a recovery of the full system (at least all the volumes that contain the operating system#39;s state). This subcommand is only available if you are using the Windows Recovery Environment.

* Wbadmin start sysrecovery -backupTarget

Specifies the storage location that contains the backup or backups that you want to recover. This parameter is useful when the storage location is different from where backups of this computer

Incorrect:

Not B. Accesses encrypted data on a severely damaged hard disk if the drive was encrypted by using BitLocker. Repair-bde can reconstruct critical parts of the drive and salvage recoverable data as long as a valid recovery password or recovery key is used to decrypt the data.

Not C. Gets the value that indicates whether the ability to perform bare metal recoveries from backups has been added to the backup policy (WBPolicy object).

Not D. Starts a volume recovery operation.

Reference: Wbadmin start sysrecovery http://technet.microsoft.com/en-us/library/cc742118.aspx

Question No: 233 – (Topic 3)

Your network contains an Active Directory forest named contoso.com.

Users frequently access the website of an external partner company. The URL of the website is http://partners.adatum.com.

The partner company informs you that it will perform maintenance on its Web server and that the IP addresses of the Web server will change.

After the change is complete, the users on your internal network report that they fail to access the website. However, some users who work from home report that they can access the website.

You need to ensure that your DNS servers can resolve partners.adatum.com to the correct IP address immediately.

What should you do?

  1. Run Set-DnsServerScavenging.

  2. Run ipconfig and specify the FlushDns parameter.

  3. RunSet-DnsServerResourceReeordAging.

  4. Run dnscmd and specify the ClearCache parameter.

    Answer: D Explanation:

    Clear the DNS cache on the DNS server with either Dnscmd /ClearCache (from command prompt) or Clear-DnsServerCache (from Windows PowerShell).

    Reference: Technet, Dnscmd

    Question No: 234 DRAG DROP – (Topic 3)

    You have 3 server named Server1 that runs Windows Server 2012 R2. You are asked to test Windows Azure Online Backup to back up Server1. You need to back up Server1 by using Windows Azure Online Backup.

    Which four actions should you perform in sequence?

    To answer, move the appropriate four actions from the list of actions to the answer area and arrange them in the correct order.

    Ensurepass 2018 PDF and VCE

    Answer:

    Ensurepass 2018 PDF and VCE

    Explanation:

    Ensurepass 2018 PDF and VCE

    • Getting started with Windows Azure Online Backup is a simple two-step process:

      1. Get a free preview Windows Azure Online Backup account (with 300 GB of cloud storage).

      2. Login to the Windows Azure Online Backup portal and download and install the Windows Azure Online Backup agent for Windows Server 2012 R2 or System Center 2012 SP1 Data Protection Manager. For Windows Server 2012 R2 Essentials, download and install the Windows Azure Online Backup integration module.

        Once you have installed the agent or integration module you can use the existing user interfaces for registering the server to the service and setting up online backup.

    • Install the Windows Azure Online Backup agent

    Before you can begin to use the online protection service, you must download and install the Windows Azure Online Backup agent on the Data Protection Manager (DPM) server. You can download the Windows Azure Online Backup agent from the Windows Azure Online Backup portal.

    To registering for online protection (box 4)

    After you install the agent on the DPM server, you must register the DPM server for online protection. Click Register Online Protection on the tool ribbon to start the Windows Azure Backup Registration wizard.

    Etc. (finish the steps in the wizard).

    Question No: 235 – (Topic 3)

    You have a server named Server1 that runs Windows Server 2012 R2. You suspect that some protected system files are corrupt.

    You need to verify the protected system files on Server1 and replace files that have incorrect versions.

    Which tool should you use?

      1. Sfc

      2. Repair-volume

      3. Repair-FileIntegrity

      4. Fsutil

Answer: A

Explanation:

Sfc scans and verifies the integrity of all protected system files and replaces incorrect versions with correct versions.

Examples:

To verify the kernel32.dll file, type:

sfc /verifyfile=c:\windows\system32\kernel32.dll

To setup offline repair of the kernel32.dll file with an offline boot directory set to d: and offline windows directory set to d:\windows, type:

sfc /scanfile=d:\windows\system32\kernel32.dll /offbootdir=d:\ /offwindir=d:\windows

Reference: Technet, sfc

https://technet.microsoft.com/en-us/library/ff950779.aspx

Question No: 236 – (Topic 3)

Your network contains one Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2. All domain computers have certificates that are issued by a certification authority (CA) named Contoso CA.

A user named User1 performs daily backups of the data on Server1 to a backup vault named Vault1. A user named User2 performs daily backups of the data on Server2 to a vault named Vault2.

You have the administrative credentials for Server2.

You need to restore the data from that last backup of Server1 to Server2.

Which two pieces of information do you require to complete the task? Each correct answer presents part of the solution.

  1. the Microsoft Azure subscription credentials

  2. the Vault2 credentials

  3. the User1 credentials

  4. the Vault1 credentials

  5. the Server1 certificate

  6. the Server2 certificate

  7. the Server1 passphrase

  8. the Server2 passphrase

Answer: D,G Explanation:

We need the Vault1 credentials to be able to access the data in Vault1.

We need the passphrase of Server1 to access the backup that was made on Server1.

Reference: Microsoft Azure – Cloud Backup and Recovery http://blogs.technet.com/b/rmurphy/archive/2014/12/02/microsoft-azure-backup.aspx

Question No: 237 – (Topic 3)

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The forest contains three Active Directory sites named SiteA, SiteB, and SiteC. The sites contain four domain controllers. The domain controllers are configured as shown in the following table.

Ensurepass 2018 PDF and VCE

An IP site link exits between each site.

You discover that the users in SiteC are authenticated by the domain controllers in SiteA and SiteB.

You need to ensure that the SiteC users are authenticated by the domain controllers in SiteB, unless all of the domain controllers in SiteB are unavailable.

What should you do?

  1. Create an SMTP site link between SiteB and SiteC.

  2. Decrease the cost of the site link between SiteB and SiteC.

  3. Disable site link bridging.

  4. Create additional connection objects for DC1 and DC2.

Answer: B Explanation:

By decreasing the site link cost between SiteB and SiteC the SiteC users would be authenticated by SiteB rather than by SiteA.

Question No: 238 – (Topic 3)

You configure the nodes to use the port rule shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to configure the NLB cluster to meet the following requirements:

->HTTPS connections must be directed to Server1 if Serverl is available.

->HTTP connections must be load balanced between the two nodes.

Which three actions should you perform? {Each correct answer presents part of the solution. Choose three.

  1. From the host properties of Server2, set the Handling priority of the existing port rule to 2.

  2. Create a port rule for TCP port 80. Set the Filtering mode to Multiple host and set the Affinity to None.

  3. Create an additional port rule for TCP port 443. Set the Filtering mode to Multiple host and set the Affinity to Single.

  4. From the host properties of Server1, set the Handling priority of the existing port rule to

    2.

  5. From the host properties of Server2, set the Priority (Unique host ID) value to 1.

  6. From the host properties of Server1, set the Handling priority of the existing port rule to 1.

Answer: A,B,F Explanation:

Multiple hosts. This parameter specifies that multiple hosts in the cluster handle network traffic for the associated port rule. This filtering mode provides scaled performance in addition to fault tolerance by distributing the network load among multiple hosts. You can specify that the load be equally distributed among the hosts or that each host handle a specified load weight.

Note: Handling priority: When Single host filtering mode is being used, this parameter specifies the local host#39;s priority for handling the networking traffic for the associated port rule. The host with the highest handling priority (lowest numerical value) for this rule among the current members of the cluster will handle all of the traffic for this rule. The allowed values range from 1, the highest priority, to the maximum number of hosts allowed (32).

This value must be unique for all hosts in the cluster. Reference: Network Load Balancing parameters.

Question No: 239 – (Topic 3)

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role service installed.

You are creating a file management task as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to ensure that the Include all folders that store the following kinds of data list displays an entry named Corporate Data.

What should you do?

  1. Create a new file group.

  2. Create a new classification property.

  3. Modify the properties of the System Files file group.

  4. Modify the Folder Usage classification property.

Answer: B Explanation:

Classification properties are used to assign values to files. Reference: Working with File Classification

Question No: 240 HOTSPOT – (Topic 3)

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 and a server named Server1. Both servers run Windows Server 2012 R2.

You configure the classification of a share on Server1 as shown in the Share1 Properties exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You configure the resource properties in Active Directory as shown in the Resource Properties exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to ensure that the Impact classification can be assigned to Share1 immediately.

Which cmdlet should you run on each server?

To answer, select the appropriate cmdlet for each server in the answer area.

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

  • Set-AdResourceProperty

    The Set-ADResourceProperty cmdlet can be used to modify a resource property in Active Directory.

  • Update-FsrmClassificationPropertyDefinition

The Update-FsrmClassificationPropertyDefinition cmdlet synchronizes the classification property definitions on the server with the Resource property definitions in Active Directory Domain Service (AD DS).

100% Ensurepass Free Download!
Download Free Demo:70-412 Demo PDF
100% Ensurepass Free Guaranteed!
Download 2018 EnsurePass 70-412 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Comments are closed.