Ensurepass

QUESTION 51

You are the desktop administrator for your company. The company’s network contains a RIS server, a DHCP server, and a DNS server. You need to install Windows XP Professional on a computer that does not have a CD-ROM drive. The computer has the following configuration:

 

  • a Pentium III 1-GHz processor

  • a 5-GB hard disk

  • 128 MB of RAM

  • a modem in the first PCI slot

  • an Ethernet card in the last ISA slot

 

You attempt to install Windows XP Professional on the computer by using a RIS bootable floppy disk. However, you are unable to connect to the RIS server. What should you do?

 

  1. Move the Ethernet card to the first ISA slot.

  2. Remove the Ethernet card and replace it with an Ethernet card that is PXE compliant.

  3. Share the RIS image on the RIS server. Create a network bootable floppy disk. Insert the floppy disk, and install Windows XP Professional from the share.

  4. Place the NDIS network drivers in the root directory of the RIS bootable floppy disk. Use the floppy disk to connect to the RIS server.

 

Correct Answer: B

 

 

QUESTION 52

You are the desktop administrator for your company. You successfully perform a clean installation of Windows XP Professional on drive C of a computer that is used by an employee named Susan. Susan is a software developer. She wants her computer to have a dual-boot configuration so that she can use either Windows XP Professional or Windows 2000 Professional. She installs Windows 2000 Professional on drive G. After installing Windows 2000 Professional, Susan restarts her computer and chooses to start Windows XP Professional. When Windows XP Professional starts, Susan sees the following error message, which is also shown in the exhibit.

 

“Windows 2000 could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM”

 

However, Susan restarts her computer and is able to successfully start Windows 2000 Professional. You want Susan’s dual-boot configuration to function properly. You start Susan’s computer and choose to start Windows 2000 Professional. What should you do next?

 

70-270-demo-7

 

  1. Copy the NTLDR file and the Ntdetect.com file from the i386 folder on the Windows XP Professional CD-ROM to the root directory of drive C.

  2. Copy the NTLDR file and the Ntdetect.com file from the i386 folder on the Windows XP Professional CD-ROM to the root directory of drive G.

  3. Restore the C:WindowsSystem32ConfigSystem file from a recent backup.

  4. Restore the G:WindowsSystem32ConfigSystem file from a recent backup.

 

Correct Answer: A

 

 

QUESTION 53

You are the desktop administrator for your company’s sales department. Katrin is a user in the sales department. You need to upgrade Katrin’s Windows 2000 Professional computer to Windows XP Professional. Philippe is the network administrator. He previously downloaded updated Setup files and placed them on a server named Server1, in a shared folder named Updates. Philippe has successfully installed computers by using these updated Setup files. You want to ensure that these updated Setup files are automatically installed on Katrin’s computer during the upgrade. Which command should you run to start Setup?

 

  1. Winnt32.exe /dushare:\server1updates

  2. Winnt32.exe /copydir:\server1updates

  3. Winnt32.exe /duprepare:\server1updates

  4. Winnt32.exe /copysource:\server1updates

 

Correct Answer: A

 

 

QUESTION 54

You are the desktop administrator for your company’s sales department. You need to perform a clean installation of Windows XP Professional on a computer that currently runs Windows 98. You start the installation. The text-based portion of Setup finishes successfully. Before the GUI-based portion of Setup starts, the computer stops responding. You investigate and discover that there is a problem with a device driver. You want to know which device is causing the problem. What should you do?

 

  1. Modify the Boot.ini file to include the /fastdetect switch.

  2. Modify the Boot.ini file to include the /sos switch.

  3. Restart Setup by using the /dudisable switch.

  4. Restart Setup by using the /dushare switch.

  5. Restart the computer. From the Recovery console, read the Dr. Watson log.

  6. Restart the computer. From the Recovery console, read the Comsetup.log file.

 

Correct Answer: B

 

 

QUESTION 55

You are the desktop administrator for your company’s sales department. The company’s network contains a RIS server. You need to install Windows XP Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows XP Professional CD-ROM, and you begin the installation. However, Setup reports that it cannot find any disks on which to install Windows XP Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do?

 

  1. Add an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.

  2. Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.

  3. Start the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk.

  4. Start the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk.

  5. Start the computer by using the Windows XP Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.

 

Correct Answer: D

 

 

QUESTION 56

You are the desktop administrator for your company. You are responsible for automating the deployment of Windows XP Professional to new computers in your company. You are preparing a Windows XP Professional computer, which you will use to test disk imaging. You install Windows XP Professional on the test computer and run the Sysprep utility. You use a third-party software package to create a disk image. You apply the disk image to a new computer and then restart the computer. Instead of completing the Windows XP Professional installation, the computer starts the Windows Welcome program, requiring you to enter additional setup information. Because you will be deploying a large number of computers, you want to ensure that the disk image can be applied without additional user interaction. What should you do?

 

  1. Use a network-based RIS server to apply the disk image to new computers.

  2. On the test computer, run the Sysprep -factory command. Re-create the disk image by using the third- party software.

  3. Use Setup Manager to create a Sysprep answer file. Copy the answer file to a floppy disk, and insert the disk into new computers when the disk image is applied.

  4. Create an Unattend.txt answer file. Copy the file to the C:WinntSystem32 folder on the test computer. Run the Sysprep utility and re-create the disk image by using the third-party software.

 

Correct Answer: C

 

 

QUESTION 57

You are the desktop administrator for one of your company’s branch offices. The network in the branch office consists of a single network segment, which contains a domain controller, a DHCP server, 10 Windows 2000 Server computers, and 50 Windows 2000 Professional computers. All servers and client computers are members of the company’s Active Directory domain. You purchase 50 new client computers for the branch office. Each new client computer contains a built-in PXE-compliant network adapter. You install and configure RIS on one of the Windows 2000 Server computers that is on the network in the branch office. You create a Windows XP Professional RIS image on the Windows 2000 Server computer. You connect the new client computers to the network in the office, and you turn on each computer. Each computer displays a message stating that it cannot contact a PXE boot server. You verify that the RIS server is connected to the network. You need to ensure that the new client computers can connect to the RIS server and can begin installing Windows XP Professional. What should you do?

 

  1. Ask a domain administrator to authorize the RIS server.

  2. Grant the Everyone group Allow – Read NTFS permission on the RIS image.

  3. Install RIS on the domain controller. Copy the RIS image to the domain controller.

  4. Add a reservation for the RIS server to the DHCP server.

 

Correct Answer: A

 

 

QUESTION 58

You are the desktop administrator for your company. You need to deploy Windows XP Professional to 50 new computers. You want to use a fully automated installation process. Each new computer is configured with a 20-GB hard disk, a CD-ROM drive, and a floppy disk drive. The computers do not contain network adapter cards. You specify the company’s standard installation settings and save them in an answer file. You want to use the Sysprep utility to prepare the source computer for the deployment. Which two actions should you take? (Each correct answer presents part of the solution. Choose two.)

 

  1. Place the answer file in C:WindowsSystem.

  2. Place the answer file in C:WindowsSystem32.

  3. Place the answer file in C:Sysprep.

  4. Place Sysprep.exe and Setupcl.exe in C:WindowsSystem.

  5. Place Sysprep.exe and Setupcl.exe in C:WindowsSystem32.

  6. Place Sysprep.exe and Setupcl.exe in C:Sysprep.

 

Correct Answer: CF

 

 

QUESTION 59

You are a help desk technician for your company, which is in the process of deploying Windows XP Professional to all client computers. You upgrade Pierre’s Windows 98 portable computer to Windows XP Professional. After the upgrade, Pierre reports that some of his older software applications no longer work properly. Also, one of the hardware devices on his computer is not currently supported by Windows XP Professional. Pierre requests that you reinstall Windows 98 and all of his applications so that he can use his computer normally. You need to restore Pierre’s computer to its pre-upgraded state while retaining all of the applications, documents, and personal data on the computer. You want to accomplish this task in the minimum amount of time. What should you do?

 

  1. Copy Pierre’s documents and personal data to a shared folder on the network. Reinstall Windows 98 and Pierre’s applications. Copy the documents and personal data to the My Documents folder on Pierre’s computer.

  2. On Pierre’s computer, run Setup.exe from a Windows 98 installation CD.

  3. On Pierre’s computer, use the Add or Remove Programs Wizard to remove the Windows XP Professional installation item.

  4. On Pierre’s computer, use a third party disk imaging software utility to apply a disk image that contains Windows 98 and Pierre’s applications.

 

Correct Answer: C

 

 

QUESTION 60

You are the desktop administrator for your company. You need to upgrade a Windows 98 computer to Windows XP Professional. Windows 98 is installed in a folder named C:Win98. You need to ensure that the computer’s applications and settings are retained after the upgrade. You insert the Windows XP Professional CD-ROM into the computer and restart the computer. The text-based portion of Setup appears. The text on the screen states that Windows XP Professional will be installed in a folder named C:Windows, not in the C:Win98 folder. You need to ensure that Windows XP Professional upgrades the existing Windows 98 installation. What should you do?

 

  1. Rename the C:Win98 folder to C:Windows.

  2. Modify the installation settings in the text-based portion of Setup so that Windows XP Professional is installed in the C:Win98 folder.

  3. Restart the computer by using Windows 98. Then insert the Windows XP Professional CD-ROM into the computer and run Setup from the CD-ROM.

  4. Use the Windows XP Professional CD-ROM to create a set of Setup floppy disks. Restart the computer by using the first floppy disk in the set to launch Setup.

 

Correct Answer: C

 

Instant Access to Download Latest Complete Collection of Microsoft MCSE 70-270 Real Exam

Try Microsoft MCSE 70-270 Free Demo

Comments are closed.