Ensurepass

Overview

Litware, Inc., is a manufacturing company located in North America. The company has a main office and two branch offices. The main office is located in Chicago. The branch offices are located in Baltimore and Los Angeles.

 

Existing Environment

Active Directory Environment

The network contains one Active Directory forest named litwareinc.com. Each office is configured as an Active Directory site. All domain controllers in the Los Angeles office run Windows Server 2008 R2. All domain controllers in the Chicago office run Windows Server 2003 Service Pack 1 (SP1). All domain controllers in the Baltimore office run Windows Server 2012. All of the FSMO roles are located on a domain controller in the Baltimore office. All of the domain controllers are configured as global catalog servers. You have a distribution group for each department. The distribution groups contain all of the users in each respective department.

Network Infrastructure

The servers in each office are configured as shown in the following table.

 

70-341-demo-27

 

The Baltimore and Chicago offices have independent Internet connections. Internet connectivity for the Los Angeles office is provided through Chicago. Users frequently send large email messages to other users in the company. Recently, you increased the maximum message size to 50 MB.

 

Planned Changes

The company plans to deploy a new Exchange Server 2013 infrastructure that will contain two Clients Access servers and two Mailbox servers in the Chicago office. The servers will be configured as shown in the following table.

 

70-341-demo-28

 

All client connections to the Exchange Server organization will be routed through a hardware load balancer. The name client.litwareinc.com will point to the virtual IP address of the hardware load balancer. Once the transition to Exchange Server 2013 in the Chicago office is complete, all mail flow to and from the Internet will be managed centrally through that office by using a Send connector that has the following configurations:

– Connector name: CH-to-Internet

– Address space: *

– Source servers: CH-EX2, CH-EX3

– Cost: 10

 

 

QUESTION 15

Hotspot Question

You need to identify which names must be used as the URLs of each virtual directory on the planned Exchange Server 2013 servers. Which names should you identify? To answer, configure the appropriate name for each server in the answer area.

70-341-demo-29

Correct Answer:

 

70-341-demo-30

 

 

 

QUESTION 16

You need to recommend changes to the network to ensure that you can deploy the planned Exchange Server 2013 infrastructure. What should you recommend?

A.

Transfer of the FSMO roles to a domain controller in the Chicago office.

B.

Change the forest functional level.

C.

Change the domain functional level.

D.

Change the operating system on one of the domain controllers in the Chicago office

 

Correct Answer: D

Explanation:

NOT A

All of the FSMO roles are located on a domain controller in the Baltimore Office.All of the domain controllers are configured as a global catalog server

No need to transfer all of these roles to the chicago domain controller as the question suggests.

NOT B

Apparently no need to change
the forest functional level

http://technet.microsoft.com/en-us/library/cc771294.aspx

NOT C

Apparently no need to change the domain functional level

http://technet.microsoft.com/en-us/library/cc771294.aspx

D

http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx

 

 

QUESTION 17

You need to recommend which tasks must be performed to deliver email messages to the Internet if CH-EX2 and CH-EX3 fail to connect to the Internet. The solution must ensure that all queued email is sent. Which two tasks should you recommend? (Each correct answer presents part of the solution.

Choose two.)

 

A.

Run the retry-queue ch-to-internet command.

B.

Create a new Send connector on a server in the Baltimore office,

C.

Modify the cost of the CH-to-Internet Send connector.

D.

Run the set-sendconnector -identity ch-to-internet -frontendproxyenabled Strue command.

E.

Disable the CH-to-Internet Send connector.

 

Correct Answer: BE

Explanation:

NOT A

Will not resolve the issue.

Use the Retry-Queue cmdlet to force a connection attempt for a queue on a Mailbox server or an Edge Transport server.

NOT C

Modifying the cost will not fix the issue of CH-EX2 and CH-EX3 failing to connect to the Internet.

Cost is used to set the priority of this connector, used when two or more connectors are configured for the same address space. The lower the cost higher the priority.

NOT D

Modifying the send connector will not fix the internet connection from chicago mail server to the internet.

Use the Set-SendConnector cmdlet to modify a Send connector.

E

Need to disable the send connector from Chicago to the internet so that when a new send connector on the Baltimore server is created, email can be sent to the internet.

 

 

QUESTION 18

Drag and Drop Question

You need to create and configure a hierarchical address book (HAB) named Litware to reflect the company’s organizational chart. Which three actions should you perform? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.

 

70-341-demo-31

 

Correct Answer:

 

70-341-demo-32

 

 

QUESTION 19

Drag and Drop Question

You are planning the upgrade to Exchange Server 2013. You plan to perform the following tasks:

 

– Identify the number of email messages sent and received by the users in the current Exchange Server organization.

– Identify how many IOPS are required to provide adequate access to mailboxes for all of the users in the planned organization.

– Validate that all of the planned servers will meet the IOPS requirements of the planned organization.

 

You need to identify which tool must be used to achieve each task. Which tools should you identify? To answer, drag the appropriate tool to the correct
task in the answer area. Each tool may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.

 

70-341-demo-33

 

Correct Answer:

 

70-341-demo-34

 

 

QUESTION 20

You are testing the planned implementation of Exchange Server 2013. After you begin moving several mailboxes to Exchange Server 2013, you discover that users on the internal network that have been moved are prompted repeatedly for their credentials when they run Microsoft Outlook. You run the Get-OutlookAnywhere cmdlet on CH-EX4, and receive the following output:

 

70-341-demo-35

 

You need to prevent the internal users from being prompted for their credentials when they connect to their mailbox by using Outlook. Which property should you modify by using the Set- OutlookAnywhere cmdlet?

 

A.

IISAuthenticationMethods

B.

InternalHostname

C.

ExternalHostname

D.

ExternalClientAuthenticationMethod

E.

InternalClientAuthenticationMethod

 

Correct Answer: A

Explanation:

InternalClientAuthenticationMethod is NTLM

Windows Challenge/Response (NTLM) is the authentication protocol used on networks that include systems running the Windows operating system and on stand-alone systems.

NTLM credentials are based on data obtained during the interactive logon process and consist of a domain name, a user name, and a one-way hash of the user’s password.

NEED TO CONVERT THE INTERNALCLIENTAUTHENTICATIONMETHOD TO BASIS NOT NTLM IN ORDER TO FIX THE ISSUE.

USE IISAUTHENTICATIONMETHODS PARAMETER IN ORDER TO ACHIEVE THIS.

Set-OutlookAnywhere

Use the Set-OutlookAnywhere cmdlet to modify the properties on a computer running Microsoft Exchange Server 2013 enabled for Microsoft Outlook Anywhere.

EXAMPLE 1

This example sets the client authentication method to NTLM for the /rpc virtual directory on the Client Access server CAS01.

Set-OutlookAnywhere -Identity:CAS01rpc (Default Web Site) -ExternalClientAuthenticationMethod:Ntlm

PARAMETERS

The IISAuthenticationMethods parameter

specifies the authentication method enabled on the /rpc virtual directory in Internet Information Services (IIS). You can set the virtual directory to allow Basic authentication or NTLM authentication.

Alternatively, you can also set the virtual directory to allow both Basic and NTLM authentication. All other authentication methods are disabled.

You may want to enable both Basic and NTLM authentication if you’re using the IIS virtual directory with multiple applications that require different authentication methods.

The InternalHostname parameter

specifies the internal hostname for the Outlook Anywhere virtual directory.

The ExternalHostname parameter

specifies the external host name to use in the Microsoft Outlook profiles for users enabled for Outlook Anywhere.

The ExternalClientAuthenticationMethod parameter

specifies the authentication method used for external client authentication. Possible values include:

Basic

Digest

Ntlm

Fba

WindowsIntegrated

LiveIdFba

LiveIdBasic

LiveIdNegotiate

WSSecurity

Certificate

NegoEx

OAuth

Adfs

Kerberos

Negotiate

Misconfigured

The InternalClientAuthenticationMethod parameter

specifies the authentication method used for internal client authentication. Possible values include:

Basic

Digest

Ntlm

Fba

WindowsIntegrated

LiveIdFba

LiveIdBasic

LiveIdNegotiate

WSSecurity

Certificate

NegoEx

OAuth

Adfs

Kerberos

Negotiate

Misconfigured

 

 

 

QUESTION 21

Drag and Drop Question

You need to identify which external namespaces must be used for the Exchange servers in each office. Which external namespaces should you identify for each office? To answer, drag the appropriate namespace to the correct office in the answer area. Each namespace may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.

 

70-341-demo-36

 

Correct Answer:

 

70-341-demo-37

 

 

Instant Access to Download Latest Complete Collection of Microsoft MCSE 70-341 Real Exam

Try Microsoft MCSE 70-341 Free Demo

Comments are closed.