EnsurepassQUESTION 131   Correct Answer:     QUESTION 132 You have been tasked with planning a VLAN solution that will connect a server in one buliding to several hosts in another building. The solution should be built using the local vlan model and layer 3 switching at the distribution layer. Identify the questions related to this vlan solution that would ask the network administrator before you start the planning by dragging them into the target zone one the right. Not all questions Read more [...]
Ensurepass  QUESTION 121 Drag and drop question. Drag the items to the proper locations.   Correct Answer:     QUESTION 122 Place the syslog message types in the left to the corresponding area on the right,based on priority from highest to lowest.   Correct Answer:       QUESTION 123 Capabilities of SNMP are dependent on the version implemented. Drag the feature descriptions on the left to the respective SNMP versions on the right.   Correct Answer: Read more [...]
Ensurepass  QUESTION 111 Which statement about 802.1Q trunking is true?   A.  Both switches must be in the same VTP domain. B.  The encapsulation type on both ends of the trunk does not have to match. C.  The native VLAN on both ends of the trunk must be VLAN 1. D.  In 802.1Q trunking, all VLAN packets are tagged on the trunk link, except the native VLAN.   Correct Answer: D     QUESTION 112 Refer to the exhibit. Which three statements are true? (Choose Read more [...]
Ensurepass  QUESTION 101 Refer to the exhibit. Which statement about the private VLAN configuration is true?   A.       Only VLAN 503 will be the community PVLAN, because multiple community PVLANs are not allowed. B.       Users of VLANs 501 and 503 will be able to communicate. C.       VLAN 502 is a secondary VLAN. D.       VLAN 502 will be a standalone VLAN, because Read more [...]
Ensurepass  QUESTION 91 Refer to the exhibit. Switch S1 has been configured with the command spanning-tree mode rapid-pvst. Switch S3 has been configured with the command spanning-tree mode mst. Switch S2 is running the IEEE 802.1D instance of Spanning Tree. What is the result?   A.       IEEE 802.1w and IEEE 802.1s are compatible. IEEE 802.1d is incompatible. Switches S1 and S3 can pass traffic between themselves. Neither can pass traffic to switch S2. B.       Read more [...]
Ensurepass  QUESTION 81 What is the effect of configuring the following command on a switch? Switch(config) # spanning-tree portfast bpdufilter default   A.  If BPDUs are received by a port configured for PortFast, then PortFast is disabled and the BPDUs are processed normally. B.  If BPDUs are received by a port configured for PortFast, they are ignored and none are sent. C.  If BPDUs are received by a port configured for PortFast, the port transitions to the forwarding Read more [...]
Ensurepass  QUESTION 71 Refer to the exhibit. BPDUGuard is enabled on both ports of SwitchA. Initially, LinkA is connected and forwarding traffic. A new LinkB is then attached between SwitchA and HubA. Which two statements about the possible result of attaching the second link are true? (Choose two.) A.        The switch port attached to LinkB does not transition to up. B.        One or both of the two switch ports attached Read more [...]
Ensurepass  QUESTION 61 Which two DTP modes permit trunking between directly connected switches? (Choose two.)   A.       dynamic desirable (VTP domain A) to dynamic desirable (VTP domain A) B.       dynamic desirable (VTP domain A) to dynamic desirable (VTP domain B) C.       dynamic auto (VTP domain A) to dynamic auto (VTP domain A) D.       dynamic auto (VTP domain Read more [...]
Ensurepass  QUESTION 51 Refer to the exhibit. You have configured an interface to be an SVI for Layer 3 routing capabilities. Assuming that all VLANs have been correctly configured, what can be determined?   A.        Interface gigabitethernet0/2 will be excluded from Layer 2 switching and enabled for Layer 3 routing. B.        The command switchport autostate exclude should be entered in global configuration mode, Read more [...]
Ensurepass  QUESTION 41 Refer to the above. Three switches are configured for HSRP. Switch1 remains in the HSRP listen state. What is the most likely cause of this status?   A.  This is normal operation. B.  The standby group number does not match the VLAN number. C.  IP addressing is incorrect. D.  Priority commands are incorrect. E.  Standby timers are incorrect.   Correct Answer: A     QUESTION 42 Three Cisco Catalyst switches have been configured Read more [...]
Ensurepass  QUESTION 31 During the implementation of a voice solution, which two required items are configured at an access layer switch that will be connected to an IP phone to provide VoIP communication? (Choose two.)   A.        allowed codecs B.        untagged VLAN C.        auxiliary VLAN D.        Cisco Unified Communications Manager IP address Read more [...]